[Free Shipping] Vessel Electric Drill Ball & Drill Set

Make Nail it!! even more fun with this easy-to-use rechargeable screwdriver

"Pounding string art nails is hard because there are so many of them."
"I hammered a nail into the edge of the board and it cracked!"
This is a great value set of an electric drill ball and a cushion drill to answer such concerns.
It allows you to drill pilot holes that are perfect for Nail it!!, reducing the strain of hammering in the nails and the risk of the wood cracking.

The electric drill ball comes with a Phillips bit No. 2, making it perfect for assembling furniture!

☆This item is free shipping☆
Any items purchased together will also ship for free!
*If the order amount is less than 5,000 yen (10,000 yen for Hokkaido and Okinawa), shipping charges will be applied at the time of payment, but we will refund the shipping charges after the payment is completed.

Also available for single purchase.
● Vessel Electric Drill Ball
● Vessel Cushion Drill No.AMD-1.2(1.2×76)

Staff N...Nail it!! Skill: Beginner

The number of times each nail needs to be driven has been reduced from 4-5 times to 2 times.
The nail went in easily and was easy to hammer in.
The drill rotates slowly so it's not scary.
The switch operation may take some getting used to.

Staff E...Nail it!! Skill: Beginner

It makes it so much easier to insert nails! When I concentrate on my work I tend to lean forward, so it's really helpful to have the light brighten up the area around me.
The switch is still pressed when you remove the drill. You have to be careful not to turn it off accidentally.

Staff H... Nail it!! Skill: Intermediate

The number of times each nail is driven is reduced from 4 to 2. It is much easier than not having to drill at all.
Another benefit is that it reduces the noise of hammering nails to some extent.
If you drill too deep it will go right through the board, so I think it's very important to mark the drill beforehand.

Nail it!! using an electric drill ball - Tips for drilling holes

1. Make a mark about 10 mm from the tip of the drill.
There is a risk that the drill will penetrate the board and damage a desk or other object.
Make a mark with tape beforehand to show how deep you want to drill the hole.

2. Drill straight!
If the hole is angled, the nail will be hammered in at an angle.
Try to keep the drill as straight as possible when drilling.
If the nail is at an angle, use pliers or a threading pen to straighten it after hammering it in.

3. Keep the switch pressed even when unplugging!
When the rotation stops, it is difficult to remove the drill from the board.
Keep the switch on from the time you start drilling until you finish removing the drill.
If you try to pull out the drill when it has stopped rotating, it may be damaged.

Electric Drum Ball

Product Specifications

Note

●Please be sure to read the instruction manual.
●When working with electrical equipment, be careful of short circuits and electric shocks.
●Overloading may cause damage or injury.
●Please store this product at home with caution as children may get caught out.
●Please use a charger with the specified rated output (output: 5V-1A). Chargers with a high current value will shorten the life of the built-in battery.
●When working at height, be careful not to drop bits or electric screwdrivers as this may cause an accident.
●If you use a bit other than the specified one, the bit may become stuck.
When installing or removing the bit, do not touch the switch, as this may cause the electric screwdriver to start operating and result in injury.
●Make sure to attach the bit securely. If the bit comes off during work, you may be injured.
●Do not continue to press the switch after the power has automatically turned off, as this may damage the internal components.
●Continuous overloading may result in breakdown.
●Do not look directly at the LED light as it may damage your eyes.
●Do not operate the switch when tightening by hand. Doing so may cause damage to the electric screwdriver due to overload.
●Do not use the electric screwdriver for work that exceeds the maximum manual torque stated in the instruction manual. Overloading the screwdriver may damage it.
●Before carrying out maintenance or bit replacement, or before transporting or storing the tool, make sure the switch is in the center position. Accidental switching on of the switch may result in injury.
●The cover is made of reinforced plastic. Do not wipe it with detergent or the following chemicals, as this may cause cracks, electric shock, or breakdown.
Benzine, paint thinner, ketones (acetone, etc.), ethers, and other similar chemical substances. ●When an abnormality occurs, use with caution and do not operate the switch. There is a risk of fire or electric shock.
●Never disassemble or modify the product yourself. Doing so may result in injury, malfunction, smoke, fire, or electric shock.
●Do not attempt to disassemble the battery or remove any of its components as this may result in fire or injury.

Cushion drill No.AMD-1.2(1.2×76)

Product Specifications

Note

●Please be careful as the drill will become very hot immediately after drilling and may cause burns.
●Make sure to securely hold the workpiece and press the drill at a right angle to the workpiece.
●Do not use an impact driver or other impact devices.
●Be careful not to damage the drill or let cutting chips fly off.
●Always wear protective glasses and never bring your hands or face close to the rotating cutting edge or cutting chips.
●If any abnormalities are observed, discontinue use immediately.
●Please store this product at home with caution as children may get caught out.

others

Although we strive to display the latest product information on the website, product specifications may change without notice due to manufacturer reasons. For this reason, the product information on the website may differ from the actual product you receive, so please be sure to check the product label and instructions before use. If you require more detailed product information, please contact the manufacturer.

Vessel Home Page

More information about Dendo Ball

For more information on cushion drills