Vessel Cushion Drill x 1

Drill pilot holes to make nailing easier with Nail it!!

"Pounding string art nails is hard because there are so many of them."
"I hammered a nail into the edge of the board and it cracked!"
For such problems, we recommend drilling pilot holes.

Available in two diameters: 1.2mm and 1.0mm.
1.2mm: Reduces the effort required for nailing. Recommended for those who often use colored nails!
1.0mm: A slightly smaller pilot hole. Recommended for those who often use unpainted nails!

By attaching this product to an electric drill ball (sold separately) , you can drill a pilot hole that is perfect for Nail it!!, reducing the strain of hammering in the nails and the risk of the wood cracking.

Tips for drilling holes using the electric drill ball and cushion drill!

* A drill bit is required to drill holes. Please purchase it separately or use our value drill set .

1. Make a mark about 10 mm from the tip of the drill.
There is a risk that the drill will penetrate the board and damage a desk or other object.
Make a mark with tape beforehand to show how deep you want to drill the hole.

2. Drill straight!
If the hole is angled, the nail will be hammered in at an angle.
Try to keep the drill as straight as possible when drilling.
If the nail is at an angle, use pliers or a threading pen to straighten it after hammering it in.

3. Keep the switch pressed even when unplugging!
When the rotation stops, it is difficult to remove the drill from the board.
Keep the switch on from the time you start drilling until you finish removing the drill.
If you try to pull out the drill when it has stopped rotating, it may be damaged.

Product Specifications

Note

●Please read the precautions listed on the package. If you are using the product with a Dentora Ball, please also read the instruction manual for the Dentora Ball.
●Please be careful as the drill will become very hot immediately after drilling and may cause burns.
●Make sure to securely hold the workpiece and press the drill at a right angle to the workpiece.
●Do not use an impact driver or other impact devices.
●Be careful not to damage the drill or let cutting chips fly off.
●Always wear protective glasses and never bring your hands or face close to the rotating cutting edge or cutting chips.
●If any abnormalities are observed, discontinue use immediately.
●Please store this product at home with caution as children may get caught out.

others

Although we strive to display the latest product information on the website, product specifications may change without notice due to manufacturer reasons. For this reason, the product information on the website may differ from the actual product you receive, so please be sure to check the product label and instructions before use. If you require more detailed product information, please contact the manufacturer.

Vessel Home Page

For more information on cushion drills