Shelf Bracket S (for 1x4, 2x4, 1x6, and 2x6 lumber)
Shelf Bracket S (for 1x4, 2x4, 1x6, and 2x6 lumber)
Couldn't load pickup availability
An item that allows you to attach and remove shelves to pillars made from Dearwall.
The shelf brackets are not noticeable, so the appearance is neat.
*Please prepare a shelf board that is 10mm shorter than the width to be installed.
Product Specifications
Set contents |
●2 shelf brackets S ●8 screws ●Instruction manual |
Suitable wood |
●1x4 (one by four) material cross section size: approx. 19 x 89 mm |
Load capacity |
4kg (when using two) |
Material |
Body and screws: Steel |
Features
POINT① Neat appearance The shelf bracket fits between the pillar and the shelf, giving it a neat appearance. You can install a perforated board or other items tightly at the bottom of the shelf, or create shelves with a narrow pitch.POINT②Shelves can be easily attached and removed. Shelves can be added or removed depending on the usage scene. Since there are no screws on the underside of the shelf, it is easy to attach it at a low position.
POINT 3: Can be used with 4 sizes of wood. Can be used with shelves of different thicknesses (1x4, 2x4, 1x6, and 2x6).
Note
●This product is for use exclusively with the Dear Wall series (sold separately).
●The shelf width is up to approximately 1,200 mm.
The load capacity value is a reference value based on our in-house experiments and does not guarantee performance. Please note that the product may not perform adequately depending on the installation location and the type of board to which it is attached.
Instructions for use and precautions other than those mentioned above are described in the instruction manual . Please be sure to read it.











