Asahipen Water-Based Multi-Purpose Matte Paint, Matte Color, 180ml
Asahipen Water-Based Multi-Purpose Matte Paint, Matte Color, 180ml
Couldn't load pickup availability
This is a water-based, easy-to-apply, low-odor paint that can be used both indoors and outdoors.
It can be applied to wood, iron, concrete, wallpaper, etc.
*The product may be ordered from the manufacturer. In that case, it will be shipped within about a week.
Product Specifications
The right place |
Indoor/outdoor classification: For indoor and outdoor use. Wooden parts such as doors, boards, and garden equipment, and wooden products such as furniture and woodwork. Exterior walls such as concrete, slate, and blocks for indoor and outdoor use. Iron parts and iron products such as fences, gates, iron bars, signs, and toys. Indoor walls (wallpaper, vinyl wallpaper) |
capacity |
180ml |
Standard number of coats |
1 coat |
Coating area (1 coat) |
1.2㎡~1.4㎡ (0.6~0.8 tatami mats) |
Paint Type |
Water-based acrylic urethane emulsion resin paint |
How to dilute |
If it is difficult to apply, dilute it with water (within 5%). |
Drying time |
Summer: 2 hours, Winter: 4 hours |
Caring for your equipment |
After use, wash brushes and tools with water or lukewarm water before the paint dries. |
Note
●Do not use for any purpose other than display.
●Do not use if you are feeling unwell or have allergies or are sensitive to chemicals.
●Handle with care to avoid getting it in your eyes or on your skin, and to avoid accidentally swallowing it.
●Leaving the product on your skin may cause inflammation. Be sure to wear protective gloves.
●Ensure good ventilation during painting and drying, and continue to ventilate occasionally thereafter until the paint smell disappears.
●Please wear clothes that will not be affected by paint when working.
●Avoid painting on days when it looks like it is likely to rain or when the humidity is high, and paint on a sunny day.
When applying the paint and while it is drying, make sure the temperature does not fall below 5 °C.
●When painting on a dark colored base or a base with large irregularities, if the paint is diluted too much or applied too thinly, it may not be possible to finish the work with one coat.
●Orange and yellow colors are easily affected by the base, so apply two coats if necessary.
●Some wallpaper, caulking materials, and sealants that have been specially surface treated may cause repelling, not adhere well, or be difficult to dry. Please test apply the product in an inconspicuous area to check the color, drying time, and adhesion before applying.
●If you apply this product over alkaline materials such as concrete, mortar, plaster, etc., the odor may become temporarily stronger. If you apply two coats, be sure to wait until the first coat has dried sufficiently before applying the second coat.
●Paint area, drying time, and hue may vary slightly depending on the color, material, amount applied, base, painting method, weather conditions, etc.
●The displayed color and gloss may differ slightly from the actual color and gloss due to printing.
●Discard the container after using up all the paint.
●If you have to throw away paint, solidify it with a paint hardener or spread it on newspaper or something similar and allow it to dry completely before disposing of it as general waste.
●Please be careful not to drop the container as the contents may leak.
Surface preparation, etc.
If powder gets on your fingers when you touch the old paint, remove the old paint using a leather skimmer, wire brush or sandpaper before applying new paint.
●When painting on walls that have cigarette tar or dirt, wipe off the dirt thoroughly or apply a primer coat of Asahipen Tar and Stain Removal Sealer.
●When painting on earthen walls, sand walls, fiber walls, etc., apply a coat of Asahipen Wall Paint Primer or Asahipen Water-based Sealer as a primer.
●For smooth surfaces, roughen the surface with sandpaper before painting. If painting directly onto iron parts, thoroughly remove any rust and apply a coat of rust-preventing paint as a primer.
When applying to concrete or mortar surfaces, be sure to apply a primer coat of Asahipen Strong Penetrating Water-Based Sealer or Asahipen Oil-Based Sealer. When applying to new concrete or mortar, wait at least one month after construction before applying.
●If mold or algae is growing in the area, remove the mold or algae with a mold remover before applying the product.
The best painting supplies
▶ Recommended brush for water-based multi-purpose paint matte color
others
Although we strive to display the latest product information on the website, product specifications may change without notice due to manufacturer reasons. For this reason, the product information on the website may differ from the actual product you receive, so please be sure to check the product label and instructions before use. If you require more detailed product information, please contact the manufacturer.
Asahipen's homepage
For more information on Water-Based Matte Multi-Purpose Paint Matte Colors








