[Free Shipping] Dearwall Guitar Shelf Set (2 Guitars + Small Item Holder)

Good news for those who are having trouble storing their guitars, or for those who want to hang it on the wall but don't want to drill holes!
This set allows you to recreate the guitar shelf shown in the photo exactly as it is.
The set includes two guitar hangers, which can hold up to two guitars.
In addition to the guitar itself, four types of convenient hooks are included for storing peripherals such as cords.
Put on your favorite guitar and create your favorite place ♪

All materials are included: the Dearwall itself, shelf brackets, guitar hangers, and wood.
The timber for the pillars will be cut to your desired size and delivered.
*There may be an error of about 1 mm.
*Please specify the lumber size in mm (millimeters). You cannot specify decimal points.

☆This item is free shipping☆
Any items purchased together will also ship for free!
*Additional shipping fees may apply to some remote islands and areas (Hokkaido, northern Tohoku, Okinawa). We will contact you after confirming your order.

It was featured in the specialist magazine "Guitar Magazine Laid Back"!

A guitar shelf made with Dearwall was featured in Guitar Magazine Laid Back (released July 13, 2022), a guitar magazine for adult guitarists.
It's also featured in Digimart Magazine , so check it out if you're interested.

Installation precautions

The screws that come with the GH-525 Guitar Hanger will penetrate through the thickness of 1x4 lumber, so to avoid drilling holes in the floor, place boards on both ends of the back panel to leave space underneath before fastening with the screws.
The instructions on how to make it are available in Digimart Magazine , so please refer to them.

How to calculate the length of timber for posts

"Length of wood for pillars" = "Ceiling height" - "45mm"

Example: If the ceiling height is 2,400mm, 2,400mm - 45mm = 2,355mm
→Enter " 2,355mm ".

Product Specifications

Set contents

● 2 pieces of 2x4 material for pillars ● 4 pieces of 1x4 material 800mm for shelves and backboards ● 2 sets of 2x4 Dear Wall S ● 1 set of 1x4 and 2x4 shelf brackets (with special screws) ● 1×4 Board bracket 3 sets (with special screws) ● 1 x 1 x 4 single hook ● 1 x 1 x 4 double hook ● 1 x 1 x 4 book stand hook ● 1 x 1 x 4 hanger hook ● 2 x KIKUTANI guitar hanger GH-525 black *The accessories in the photo are not included in the set.

Suitable wood

2x4 (two by four) material cross section size: approx. 38 x 89 mm 1x4 (one by four) material cross section size: approx. 19 x 89 mm

Load capacity

Shelf support: 5kg (when using 2) 1 x 4 Board Bracket: 5kg (when using 4 pieces) *Guitar hanger weight including the wood to be attached: 10kg

Material

【Dia wall】 Top and bottom pads, adjustment spacers: ABS resin Anti-slip sheet: Rubber Spring: Steel [Shelf support] Body: ABS resin Screws: Steel [1x4 Board Bracket] Body and screws: Steel [1×4 Hooks Various] Steel [Guitar Hanger] Arm: Steel Plate: Aluminum die-cast [Wood] Pine Laminated Wood

Features of laminated timber

This popular DIY standard timber product is made from pine plywood.
Laminated wood is manufactured by gluing together multiple pieces of wood.
It is characterized by its ability to suppress warping and bending and to minimize dimensional deviations due to shrinkage.
It is also widely used in wooden buildings.

In addition, compared to the 2x4 lumber (solid wood) generally sold at home improvement stores, etc., there are almost no large knots, bends, warping, resin, or cracks.
The surface is smooth, so it is easy to paint.
This wood is suitable for DIY projects using Deerwall.

What is Dearwall?

An item that can create pillars indoors.
Just put the pad over the cut wood and stretch it. Since no tools or stepladders are required, anyone can install it easily. Since no holes are required in the wall or ceiling, it is safe even for rented properties.
Since Dearwall is made by building materials professionals, you can enjoy authentic DIY.

POINT① The spring built into the upper pad holds the wood firmly in place. If you cut it to the specified dimensions, anyone can hold it in place with a consistent force. This means that there is no more strain than necessary on the ceiling or floor.

POINT 2: No tools or stepladders required. Since the support is pressed against the ceiling from below, no tools or stepladders are required. Anyone can easily install it.

POINT 3: No need to drill holes in the wall, so it's safe even for rented properties Since you can set up the pillars without drilling holes in the wall, it's safe for use in rented properties such as condominiums and apartments, and in concrete walls.

Delivery Information

●We will ship within 5 business days after receiving your order.
●This product will be shipped by Sagawa Express (large item).
●When delivering to a second floor or higher, such as an apartment building, if the delivery company determines it is difficult to carry the item up the elevator or stairs, we may ask you to deliver the item on the first floor.

Note

●Do not install this product in places where the floor and ceiling are not level, such as a sloped ceiling.
●This product is intended for use on solid ceilings and floors, so do not use it on soft materials or unstable ceilings or floors.
●The strength varies depending on the situation, such as the ceiling, floor, and object to which it is attached. After checking for wobbling after installation, use it within the range where there is no risk of it falling over.
Please use it only in a vertical (up and down) orientation. Never use it in a horizontal (sideways) orientation as it may fall.

Other precautions than those mentioned above are described in the instruction manual . Please be sure to read it.

About KIKUTANI Guitar Hanger GH-525

This guitar hanger can hold the neck of your guitar and store it in a hanging position. It uses an aluminum die-cast base plate to ensure durability. It has a proven track record and is widely used as fixtures in major music stores.

This type is installed by screwing directly to the wall. The surface area in contact with the wall is large, so even heavy items such as electric guitars can be stored safely. The hook part has a rotating mechanism, so even guitars with asymmetrical heads can be hung with a natural balance.

We strive to display the latest product information on the site, but product specifications may change without notice due to manufacturer reasons. For this reason, the product information on the site may differ from the product you receive, so please be sure to check the product label and instructions before use. If you require more detailed product information, please contact the manufacturer.

Kikutani Music Co., Ltd. Home Page

For more information about the KIKUTANI Guitar Hanger GH-525